Motion Sensor With Timer

Simply plug one of the cables into a standard 110VAC outlet and then plug your props or lights into the provided outlet. The on time is adjustable from a minimum of approximately 2 to 3 seconds (on the test setting). The next time is about 10 to 20 seconds, with large increments up to a high of about 10 to 15 minutes.

• Max load must not exceed 300-watts (which is about 3-amps). Max 72W LED DRIVER/ LED Bulbs.
• Up to 60 feet detection distance with a 240° detection zone.
• Works with AC devices.

Please note: We recommend our PicoBoo AC controller with our Prop Controller Motion Trigger If you need better control and support for higher-amperage draws.